How to Correctly Attach a Slider to Continuous Metal Zipper Chain

So we’ve outlined how to do it so you can slide a slider onto your metal zipper chain the proper way, WITHOUT feeling like you need to pull your hair out each step of the way.

How to sew a slider on a piece of continuous metal zipper:

Here’s how to start: First things first, you need a continuous   metal zipper chain   of the right size to work with. Then take one end of the zipper chain and feed it into the slider by turning the teeth right-side up. Next carefully move the slider across the chain, keeping the teeth lined up. At the end of the chain, crimp the stopper at its bottom with pliers, making sure the slider is locked inside the stopper.

How to attach slider to metal zipper chain:

1. First, open the slider and set it open with the wide part on top.

2. Feed one side of the zipper chain through the slider, the teeth facing up.

3. Move the slider down the chain, and make sure the teeth mesh correctly.

4. When the slider has been slid to the very end of the chain, squeeze with pliers the stopper by the bottom so that it can not come off.

5. Test the slider to ensure its smoothly moves on the chain without sticking.

How to sew on a slider onto continuous metal zippers:

• Before installing, rub a small amount of wax or soap on the zipper teeth to ensure smooth running.

• If you’re having difficulty getting the slider to smoothly glide, you can take some pliers & slightly squeeze the sides of the slider to loosen or tighten.

• Be patient and take your time slow and steady to avoid bending or damaging any of the metal teeth on the zipper chain.

Prevention of common erroneous operation when connecting slider to metal zipper chain:

• A common issue in attaching a slider to a   metal zipper chain   is incorrect tooth alignment. Make sure the teeth are facing upward and aligned properly before you slide the slider on.

• Another classic oopsies that sometimes occur is when you exert too much strength when you slide the slider down the chain. Just be gentle with it and let it attach properly.

Professional guidance on attaching a slider to continuous metal zipper chain:

Buy a good quality slider and zipper chain for professional finishing. Low quality or simply cheaper sliders can be hard to open or close and not be very secure when attached. And like anything, practice makes perfect when attaching sliders to metal zipper chains, so if your first few attempts are less than perfect, don't fret.

If you follow these tricks and tips, attaching a slider to a continuous   metal zipper   will be a cinch! With a little practice, you’ll be zipping around in no time like a true professional.